Ball Speed Sensor Connection

Step 1: Connect the Wireless Transmitter to the ball speed sensor, and provide local power supply nearby.
Wireless Transmitter
Model: KS-BSPD-WHT

Step 2: Plug the Wireless Receiver into the Ultra Score Terminal PC.
Wireless Receiver
Model: KS-BSPD-WHR

Step 3: Open the Ultra Score software, and configure as follows:
3.1 Click “Settings” > “Device Settings”, then click “Sensor” and add the “STALKER SPEED RADAR”.

3.2 Click “Device ManageMENT” to check the port number.

3.3 Click “OK” to save the settings.

3.4 A green icon will appear in the lower-left corner upon success.