Use with EuroLeague Digital Scoresheet

Use an RS232 serial tool to connect two computers.

Click “settings”, then select “Device Settings”.

Select “EuroLeague Digital Scoresheet” in Device 1. The system will automatically identify the serial port. Then click “OK”.

If the software establishes a correct connection with the device, the connection status bar in the lower-left corner of the screen will display with a green background color.

Now you may use Ultra Score together with EuroLeague Digital Scoresheet.

If connect the switch and computer via an Ethernet RS232 serial converter.

Click “settings”, then select “General Settings”. Then click “Data Out”.

Select “EuroLeague Digital Scoresheet” in Others 1. The system will automatically identify the serial port. Check “UDP Broadcast” (Default UDP Port: 9000)

If connect the RS232. Check “Serialport”. The system will automatically identify the serial port.

If the software establishes a correct connection with the device, the connection status bar in the lower-left corner of the screen will display with a green background color.

In the Euroleague Digital Scoresheet software, click Ports. In the pop-up dialog box, select the corresponding port from and Console In. Default input baud rate:19200.

Without using software. Connect the console using the “RS232 to USB cable” port, and connect the other end to the KS-MONSTER.