1. Connect an RS232 cable onto PC port of the timing console.
2. Connect and turn on the power.

Double click “AMM.exe”.

Click “sw:1.15 30.05.02”. Then click “Activate” button.

Display “SW:1.15 module is Activated”.

Click “settings”, then select “Device Settings”.

Select “SWISSTIMING ARES21 (Swimming)” in Device 1. The system will automatically identify the serial port. Then click “OK”

If the software establishes a correct connection with the device, the connection status bar in the lower-left corner of the screen will display with a green background color.

Click “settings” button to change the pool of module parameters

Now you may use Ultra Score together with Ares21 console.